cbe Posted December 10, 2023 Report Share Posted December 10, 2023 Hey all, first post here, and first real build so still learning. I have a G4X StormX, and am looking to connect my powertune digital dash. My Wiring Specialties harness has a subharness with CAN Hi/Lo, 12V, and Ground, which is plugged into my CAN-LAMBDA. It then has two additional flying leads I haven't figured out, which are labeled 5v, and sensor ground, there's a chance they're not even used. Would a CANTEE splitter work for an additional CAN connection for the dash? If so that would make life way easier. Thank you all! Car is a 1990 240SX with a KA24DE of that changes anything. Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 11, 2023 Report Share Posted December 11, 2023 The 5V and Gnd would be for adding extra sensors. Yes you could use a CANTEE to splice into the CAN bus for the dash. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.