Toyota Supra B58B30 Engine

[Moiad Yousef]

Hello Everyone, 

 

I have B58B30 Engine, we need the pinout for vanos connectors and if available for whole engine will be great, 

Cheers !

[mapper]

On 1/30/2024 at 12:22 PM, Moiad Yousef said:

Hello Everyone, 

 

I have B58B30 Engine, we need the pinout for vanos connectors and if available for whole engine will be great, 

Cheers !

I have done lots of development on this engine! Including ground braking 5-stage dry sump kit. 1250 Nm at 3500 and 1100 PS :-D
https://www.maptec.ch/product-page/maptec-B58-Ultimate-PI-1100PS-Race-Engine

You can PM me.

[Endurance_Racer]

Hello,

 

I can help with this as well. We ran this car in the 25 hour of Thunderhill stateside. We are currently offering full PDM integration with AIM PDM32 unit and are looking at throwing a link G5 at it. We have the wiring schematics. I will post them up here shortly. If you need anything else. Let me know.

Cheers!

[Shamil Arachi]

Hi guys, im looking to do this same engine and looks like i have to decide about the voodoo pro to get di injection working and something like the link fury with just port injection. Would anyone be able to help with pin outs of the vanos etc ?

[Shamil Arachi]

bumping for good measure