Jump to content

DEKA 630cc and Coil Pack questions


Recommended Posts

Hi guys, im starting to get my map setup with all the basic settings needed, but im a bit stuck on some of the values needed for the coil pack and injectors.

The engine is a 2ltr 4 cylinder Ford Zetec with a turbo

The injectors im running are DEKA 630cc with a 380kPa regulator.

Ive put these initial settings in but I had to guess the dead times for 43psi from the table listed here (dead time table) i also had to work out the time for 7volts. Does this look right? Also im not sure what i should put as the min effective pulse width as im guessing that will be impacted by the base fuel pressure? 




Lastly does anyone know where I can get the settings to setup this coil pack. I can not see anything clearly listed on the net.

BOSCH 0 986 221 048



Thanks in advance


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...