Elvis Frederick Posted January 8, 2008 Report Share Posted January 8, 2008 Hello i am new i am an owner of a new lg3 plug and play mazda 323 GTR ecu.My question is since i have to illiminate the mass air flow meter where is the location on the ecu or adapterlink do i have to wire in the mapsensor.Can someone care to give me the instruction, Quote Link to comment Share on other sites More sharing options...
Jesus M. C. Posted January 8, 2008 Report Share Posted January 8, 2008 Hello i am new i am an owner of a new lg3 plug and play mazda 323 GTR ecu.My question is since i have to illiminate the mass air flow meter where is the location on the ecu or adapterlink do i have to wire in the mapsensor.Can someone care to give me the instruction, Hello Elvis, i think you are wrong because the map is inside de ecu. I think you are talking about wiring the intake temp sensor. Then you must search the signal wire and the ground wire that goes to the maf sensor, because it's the nearest position for taking this signals. The color for the signal to the ecu are red with black strip. The color of the wire for the sensor ground is black with brown strip. I hope this helps you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.