Boltwizard Posted March 27 Report Share Posted March 27 KA24DE in an s13. RPM signal drops to zero randomly, not sure if its a hardware problem or a problem with my tune. See attached for Tune file, and trigger scopes at different RPMs. Log file below on google drive as it exceeded max file size (error shows at about 4:40 and again around 6:00. Log got messed up in the second half when the PC went to sleep) https://drive.google.com/file/d/16DJdQHqjUES7-KD54JP-w1Wg7CdHlGHB/view?usp=sharing Trigger Scope - 2024-03-26 7_55_24 pm 3500RPM.llgx Trigger Scope - 2024-03-26 7_56_27 pm 4250RPM.llgx Trigger Scope - 2024-03-26 7_56_43 pm 4900RPM.llgx Base Tune(Built Motor).pclx Quote Link to comment Share on other sites More sharing options...
Vaughan Posted March 27 Report Share Posted March 27 I would recommend changing Trig 2 edge to Falling and then checking your base timing with a timing light. Also as a side note your firmware is quite old. TTP 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.