kondziokiwikiwi Posted May 26 Report Share Posted May 26 Hello, I tried to find the answer with "search button", but i failed. I have bought S14 with Link ViPec G4. I added some few extra sensor and wanted to have a display with all data/readout by CAN. It wasnt possible, there was message that my ECU has serial number below 10000 and CAN need to be upgraded. What should i do? Thanks for help. Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 27 Report Share Posted May 27 It is a free service if you cover the shipping to and from Link (in NZ). Otherwise if you know someone that is experienced with small surface mount soldering then I can give you some instructions on what needs to be done. Quote Link to comment Share on other sites More sharing options...
kondziokiwikiwi Posted May 27 Author Report Share Posted May 27 I have someone exacly for this job. Instruction and knowledge on what need to be done would be perfect, thank You Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 28 Report Share Posted May 28 I have PM'd you some info. Quote Link to comment Share on other sites More sharing options...
Chris p Posted July 14 Report Share Posted July 14 Hey mate would you be able to send me the instructions on how to make can work on a old G4? I have a PNP G4 GTR ecu that is early serial number and can't configure can to run a digital dash. I have a friend who is able to do the modifications to the ecu if he has the instructions Thanks Chris Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.