eric0122 Posted June 3 Report Share Posted June 3 Hi everyone, I have g4x and show the oil pressure have 1 decimal point for example 4.2 kgm. But in my IC7 showing only have a number for example 4.0 kgm. How I can set it up so the ic7 have 1 decimal point? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 3 Report Share Posted June 3 The oil pressure is broadcast from the ECU with a resolution of 1kPa, if you are seeing less resolution at the haltech end then you will need to get advice from Haltech. eric0122 1 Quote Link to comment Share on other sites More sharing options...
TOMMYFD Posted June 3 Report Share Posted June 3 You can change your decimal points from your ic7 software Quote Link to comment Share on other sites More sharing options...
eric0122 Posted June 4 Author Report Share Posted June 4 15 hours ago, TOMMYFD said: You can change your decimal points from your ic7 software I try to have a look how I can change in the software. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.