Matt Jenkins Posted October 2, 2012 Report Share Posted October 2, 2012 Hi mate, Ive got what i think is a Link G1 V3.   Sticker on the chip says  B42V3   201000 And the board has a sticker that says  9709  S/N  314527 Is it possible to get a circuit diagram for the board or if there is a guru that would know what the resisotor value is of the first resistor in line with the Ignition 3 input i have managed to roast it.  Cheers Quote Link to comment Share on other sites More sharing options...
Simon Posted October 2, 2012 Report Share Posted October 2, 2012 It will be a 22R 1Watt resistor. Assuming it is the one on the output of the ignition 3 transistor and not the pullup resistor. Quote Link to comment Share on other sites More sharing options...
Matt Jenkins Posted October 3, 2012 Author Report Share Posted October 3, 2012 Unsure, its the resistor between the Ignition 3 connector plug and the transistor, Â ive added a picture which should clear it up. Â It's where ive put the white 10R resistor. Â So now assuming my guess was wrong and should replace it with a 22R ? Cheers Quote Link to comment Share on other sites More sharing options...
Simon Posted October 3, 2012 Report Share Posted October 3, 2012 That is an older board. 10R is what the other 2 drives have. The later revisions went to the 22R You will be fine to leave the 10R in there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.