dejun Posted July 4 Report Share Posted July 4 双DBW 另一个油门通过 E 油门模块控制,气缸组 2 氧传感器通过 AEM 模拟信号输入控制,我的触发器和 VVT 设置有问题吗? G4+ Fury vq37.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 5 Report Share Posted July 5 Does the engine run? You dont need to worry about VVT settings until the engine is running reliably. The right-hand intake cam (bank 1) needs to be connected to trigger 2 and the left hand intake cam needs to be connected to DI1 for this trigger mode to work. Quote Link to comment Share on other sites More sharing options...
dejun Posted July 5 Author Report Share Posted July 5 2 hours ago, Adamw said: 发动机运转吗?在引擎可靠运行之前,你不必担心VVT的设置。 右侧进气凸轮(气缸组1)需要连接到触发器2,左侧进气凸轮需要连接到DI1,此触发模式才能工作。 When you say right cylinder bank, do you mean cylinder 1 3 5? The left cylinder bank refers to cylinder 2 4 6? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 5 Report Share Posted July 5 Yes, the Right side is cyl 1/2/3. Quote Link to comment Share on other sites More sharing options...
dejun Posted July 5 Author Report Share Posted July 5 26分钟前,亚当说: 是的,右边是气缸1/2/3。 G4+fury can control two throttles with e throttle module, right? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 6 Report Share Posted July 6 On 7/5/2024 at 4:17 PM, dejun said: G4+fury can control two throttles with e throttle module, right? Not G4+, only G4X Fury. Only the Thunder had 2 x e-throttle control available in G4+ range. Quote Link to comment Share on other sites More sharing options...
dejun Posted July 6 Author Report Share Posted July 6 7 minutes ago, Adamw said: 不是 G4+,只有 G4X Fury。只有雷霆在 G2+ 范围内有 4 个电子油门控制。 Isn't it possible for the G4+FURY to control both throttles with this module? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 6 Report Share Posted July 6 No, G4+ Fury does not have any software functions for 2 throttles. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.