Nick Stone Posted October 11, 2006 Report Share Posted October 11, 2006 http://www.canze.org.nz/forum/hosting/tps.jpg Yellow = Vcc Red = VTA Blue = IDL Brown = Earth (E2) according to the image and the pin out which wire is my tps and which is the 5v? cheers, Nick Quote Link to comment Share on other sites More sharing options...
Nick Stone Posted October 11, 2006 Author Report Share Posted October 11, 2006 sorry should state im using a lem v5 on a redtop 16v 4age. looking for which tps plug wire colour as above should connect to the tps wire and 5v wire on link Quote Link to comment Share on other sites More sharing options...
ashesman Posted October 15, 2006 Report Share Posted October 15, 2006 Vcc is a common electrical engineering term for power supply. VTA will most likely be the throttle position signal. IDL will be the idle switch (not used on the LEM). So you should measure a constant resistance between VCC and E2 when the throttle is moved. Connect the +5V to Vcc and Earth to the signal ground. Connect the TPS signal wire to VTA. Remember to set the throttle span on the LEM. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.