Zchris Posted July 14 Report Share Posted July 14 So I was told to here to use the K24 trigger format. Only thing I found was K24VTC so I used that. I now have spark but engine does not fire . Checked compression and thats good. Squirted some fuel in to make sure fuel was not the issue. Still not even a pop. So I have to assume the spark timing is a country mile off. This is a single lobe cam with no Intake cam phazer. And triggers are stock crank and stock exhaust cam. Any ideas why I'm having this issue. Thanks Quote Link to comment Share on other sites More sharing options...
Zchris Posted July 14 Author Report Share Posted July 14 Figured it out by looking at newest version of software and saw a difference in the trigger offset. Newer is zero and the older had 277 degrees baked in. Changed to zero and it started. I assumed because of the 12 tooth +1 that it required that 277 offset. Thanks . I'm sure I'll have more questions when I upgrade to a DBW capable ECU. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 15 Report Share Posted July 15 What ECU & what trigger mode are you using? You need the 5 tooth exhaust cam connected to trigger 2 for the K20 or K24 trigger mode to work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.