team claymore Posted July 14 Report Share Posted July 14 First event since new build on the weekend, was wondering if anyone can have a look at my log, i realize now i did not set up enough parameters to record but i have some basics. After a few laps, it felt like an ignition break down and then i also experienced zero to minimum throttle response when trying to rev engine. Looking at log around 11.20 trying to understand why all of a sudden i am getting high readings on my main & subs but not much engine rpm. I will be replacing the coils as they are stock and am waiting for them to arrive. https://drive.google.com/file/d/1tUU3FMy1GGWQsYvmE3ItyKB3mMPlR_5Y/view?usp=drive_link Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 15 Report Share Posted July 15 The share permissions on the share link need to be set to "anyone with link". Share the tune also. Quote Link to comment Share on other sites More sharing options...
team claymore Posted July 15 Author Report Share Posted July 15 Thanks Adam, Tune File https://drive.google.com/file/d/1CLlU-J2-VHs6Eb4gF88ZKkgpiG83OGZl/view?usp=sharing Log file https://drive.google.com/file/d/1tUU3FMy1GGWQsYvmE3ItyKB3mMPlR_5Y/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
team claymore Posted July 17 Author Report Share Posted July 17 Also while I think of it , Evans seems to be the go to in terms of g4x training unless you would suggest otherwise? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 17 Report Share Posted July 17 There is very little recorded in the log so it isn't much use. But my guess is your GP RPM limit 1 is limiting RPM due to your lambda going above 0.84 when you open the throttle. Quote Link to comment Share on other sites More sharing options...
team claymore Posted July 17 Author Report Share Posted July 17 I'll check my lift pump isn't playing up thanks adam Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 17 Report Share Posted July 17 I would just turn that limiter off to confirm. A limiter based on lambda typically doesn't work well since a limiter results in a lean lambda reading, so you end up with a self-perpetuating problem. team claymore 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.