Frm_Zero7d9 Posted July 22 Report Share Posted July 22 Hey all, I'm currently going through the G4X install manual on my 04 STi (USDM) car. I'm at the point where I am checking all the I/O's. My question: Are we simply confirming that the I/Os are connected to their described function in the Pinout section of the manual? Are we supposed to be calibrating or changing certain sensors, to different outputs? Thanks! Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 23 Report Share Posted July 23 For the inputs you should be checking they are working and reading correctly for any that you can with the engine off. For example is MAP, ECT & IAT showing realistic values, do both APS values read 0 with no pedal and 100% when pedal is on the floor. It looks like you dont have TGV sensors connected so that function should be turned off. For the outputs you probably dont need to check much before start-up, but you can for example set the fan output test mode on to make sure the fan comes on etc. Quote Link to comment Share on other sites More sharing options...
Frm_Zero7d9 Posted July 23 Author Report Share Posted July 23 Thank you Adam, this really help me keep track of everything that I need to do before start up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.