Tyler Roberts Posted September 26, 2010 Report Share Posted September 26, 2010 i recently bought a 98 eagle talon. On board I have a g3 link 7 bar map sensor. I have no pc link or any software for this system. I have a buddy that runs a dsm link that might be able to help me. Does anyone know if it's worth getting a pclink for this system or just go out and buy a dsm link? Thanks Quote Link to comment Share on other sites More sharing options...
Cameron Moore Posted September 26, 2010 Report Share Posted September 26, 2010 Hi Tyler, If you have a Link MAP sensor then it is likely you are running an aftermarket ECU (most likely ours). You might have a G4 plug-in inside the factory box, or a G3 with adaptor plugged into your factory loom. Feel free to post some pictures if you need us to identify anything. -Cameron Quote Link to comment Share on other sites More sharing options...
Tyler Roberts Posted September 27, 2010 Author Report Share Posted September 27, 2010 Thanks! I took a picture a couple days ago of the sensor but never got a chance to look at the ecu yet. To tell you the truth I didn't even know where the ecu was untill now.. Noob! I'll have to post a picture from my computer tomorrow becsuse my phone won't allow me to send it. Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted October 14, 2010 Report Share Posted October 14, 2010 Pic? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.