jens pettersson Posted July 30, 2014 Report Share Posted July 30, 2014 hi there am I able to do the upgrade myself or does it need to be done professionally, cheers jens Quote Link to comment Share on other sites More sharing options...
Simon Posted July 30, 2014 Report Share Posted July 30, 2014 The upgrade can be done yourself the PDF attached out lines what is involved. Quote Link to comment Share on other sites More sharing options...
michael Posted June 5, 2015 Report Share Posted June 5, 2015 Hey there I have an s15 silvia with an sr20det and have just wired in a link + G3 with the upgraded firmware everything is working perfectly except I am getting no signal from trigger 1 or 2 I have double and triple checked wiring and all settings on computer, I have been trying to run the ECCS function in trigger setup but am getting no result  please help????? is it to do with the new firmware or is there something I am missing in the programing ????  regards michael Quote Link to comment Share on other sites More sharing options...
Simon Posted June 7, 2015 Report Share Posted June 7, 2015 When you run the test ECCS do you get a figure at all in the widest slot? If this happens to come up as 1 you will need to swap your 2 triggers over. Then rerun the test. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.