motionper Posted January 28, 2014 Report Share Posted January 28, 2014 I AM TRYING TO RUN FOUR COILS SINGLE FIRE, RIGHT NOW I HAVE #1 CYLINDER ON COIL OUTPUT 1 AND 2 AND HAVE CYLINDER 2 COIL ON COIL OUTPUT 3 AND 4 I WANT TO FIRE #1 AND TWO COILS AT ONCE AND # 3 AND 4 COILS AT ONCE THIS IS A G4 LIGHTNING BOX-WHAT FIRING ORDER SETTINGS DO I USE FOR THIS SET UP?? I HAVE A CRANK AND CAM SENSOR Quote Link to comment Share on other sites More sharing options...
Simon Posted January 29, 2014 Report Share Posted January 29, 2014 As the motor is a twin cylinder you will need to set the cylinder count to 2 cylinder. I assume you have two plugs per cylinder and both will be fired at the same time. In this case you will need to wire two coils to on ignition out put. So cylinder 1 coils are wired to ignition 1 output and cylinder 2 coils are wired to ignition 2 output. In your odd fire table you will then only need to enter the number of degrees to the 2nd firing event. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.