Konstantinos Korres1436215376 Posted April 3, 2009 Report Share Posted April 3, 2009 Hello , I have a Toyota Starlet Glanza (4EFTE engine) and i just finished installing a link G4 Storm ECU. Moreover i replaced the stock distributor ignition with Wasted spark ignition taken from a Toyota corolla AE111 (4EFE engine) and also installed the OEM toyota corolla crankshaft trigger wheel along with the magnetic sensor. I managed to set up the coils and igniter correctly but i am having trouble configuring the trigger wheel in trigger menu of pclink. The only info i have on the crankshaft wheel is that the sensor is magnetic and has 2 cables on it and that the trigger wheel has 32 teeth and ONE bigger tooth (there is NO gap). Also when the bigger tooth is facing the sensor the first cylinder piston is at the top end. Could someone please help me with the above settings so that i can finally start the engine ? attached is a foto of the trigger wheel thanks ! Quote Link to comment Share on other sites More sharing options...
Denis Tan Posted April 4, 2009 Report Share Posted April 4, 2009 Select Multitooth/Missing, Missing teeth = 2, Tooth count = 36, Sync Pulse = No. Quote Link to comment Share on other sites More sharing options...
Guest Dave Posted April 4, 2009 Report Share Posted April 4, 2009 As above it is a 36-2 trigger wheel will only allow group fire injection so make sure you select the relevant drivers trigger offset will be 69degrees Regards David Heerdegen [email protected] Quote Link to comment Share on other sites More sharing options...
Konstantinos Korres1436215376 Posted April 4, 2009 Author Report Share Posted April 4, 2009 thanks a lot guys ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.