Dean Peka Posted May 4, 2015 Report Share Posted May 4, 2015 Hi there, I've just bought this unit secondhand with adapter harness to suit my Mitsubishi Evo 3. Unfortunately I don't really know what I'm doing!...but anyway I was hoping if I installed it it might run (at the very least)Â but alas engine won't fire. I turn the ignition on and the fuel pump runs for 3 seconds - have plumbed in the MAP also. Any suggestions what to do? Does this require a hand controller or can I use a laptop...and would this be a step in the right direction? Sorry, newbie questions Cheers Dean Quote Link to comment Share on other sites More sharing options...
Simon Posted May 6, 2015 Report Share Posted May 6, 2015 There will be some initial set up to be done. You can connect via PC on the LinkPlus. You will require a serial link to do this. Also the manual can be found here for download. http://www.linkecu.com/support/documentation/g1-engine-management-documentation/LinkPlus%20V14%20manual.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.