Matthew Lee Posted August 23, 2010 Report Share Posted August 23, 2010 Hey i have a 1983 series 3 rx7 and i have had to put in a G3 storm link ecu it wont start with the key but runs when tow started but prety rough can anyone help out with a basic tune to get it running enough to be able to be put on the dyno Any help would be greatly apreciated Thanks Matt Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted August 31, 2010 Report Share Posted August 31, 2010 Hi Matthew. Here is an LEM G3 Rotary Sample File. This file was provided as a demonstration of the LEM G3 as it would be configured in a typical Rotary engine application. Please understand to the best of our knowledge this file is OK, but cannot not be held liable for anything untoward happening. In short, all care no responsibility comes with this file (attached). This will hopefully get you started and idling after a quick twiddle on the master fuel number and an AFR reading. Please check everything BEFORE attempting starting the vehicle. Jurgen Quote Link to comment Share on other sites More sharing options...
Matthew Lee Posted August 31, 2010 Author Report Share Posted August 31, 2010 Hey thanks heaps with your help this will give me something to work with and compare what i already have cheers Matt Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted September 22, 2010 Report Share Posted September 22, 2010 No prob Matt. Let us know how you get on. Jurgen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.