Siegerd Costens Posted April 21, 2015 Report Share Posted April 21, 2015 Hi I have problem with my Link G4 plug in ECU, when i start the engine i have no spark/ignition. But when i drive the spark plugs with the Link ECU program on the computer, i can drive the 6 spark plugs and I can see them fire. I think the Link ECU wont drive the sparks when i start the engine, but i don't now why the Link doesn't do that. This problem started after not driving it for 3 weeks and had a flat battery, now the battery is already fully loaded. Thx! I hope somebody could help me with this problem Quote Link to comment Share on other sites More sharing options...
Simon Posted April 22, 2015 Report Share Posted April 22, 2015 First thing to check is that you are getting an RPM signal to the ECU. You will need to connect up to the ECU with a PC to check this and go to the runtimes menu (F12) or (r key)Â Â Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.