José Santana Suárez Posted November 30, 2014 Report Share Posted November 30, 2014 Buenas tardes: Tengo una link storm, intento acionar la tracción de control y solo esta la opción off. ¿me puede explicar el por que? Quote Link to comment Share on other sites More sharing options...
José Santana Suárez Posted November 30, 2014 Author Report Share Posted November 30, 2014 Good afternoon:I have a link storm, try acionar traction control and is only the option off. Am I may explain that? Good afternoon:I have a link storm, try acionar traction control and is only the option off. Am I may explain that? Quote Link to comment Share on other sites More sharing options...
José Santana Suárez Posted November 30, 2014 Author Report Share Posted November 30, 2014 Good afternoon:I have a link storm, try acionar traction control and is only the option off. Am I may explain that? Quote Link to comment Share on other sites More sharing options...
Simon Posted December 1, 2014 Report Share Posted December 1, 2014 Hi Jose The firmware for traction control is not yet available once this is available you will be able to do a firmware upgrade and will then have settings to work with. Quote Link to comment Share on other sites More sharing options...
José Santana Suárez Posted December 1, 2014 Author Report Share Posted December 1, 2014 Hi Simon, do you know when the firmware control tacción be available? Quote Link to comment Share on other sites More sharing options...
Simon Posted December 1, 2014 Report Share Posted December 1, 2014 It is undergoing testing currently it will very much depend on how it passes testing. I would hope it will be before Feb next year. (But if testing goes bad this will be pushed out) Quote Link to comment Share on other sites More sharing options...
Kevin Boyd Posted December 21, 2014 Report Share Posted December 21, 2014 I'm keen on using full traction control as well. I have a 94 Supra and looking at the Supra JZA80 chassis, I see it has 48 teeth for the ABS sensor which would require 2000hz support to work up to 300kmh. As the Vi-Pec/Link only supports up to 500hz, are there any plans to upgrade the hardware to support more than 500hz? If not, are there other options than installing custom triggers with 12 teeth (to stay under 500hz) for the rear and front wheel inputs to the traction control software you are developing? Quote Link to comment Share on other sites More sharing options...
Simon Posted December 21, 2014 Report Share Posted December 21, 2014 Hi Kevin No planed changes for the G4+ hardware wise at this point only option will be custom wheel speed triggers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.