jason buchan Posted March 26, 2014 Report Share Posted March 26, 2014 gidday I would like to know if this computer will work for a early mitsi cordia turbo motor with a inductive pick up inbuilt in distributor there is a chip on the circuit board with the numbers d42v5e and under that it has 170506 cheers  Quote Link to comment Share on other sites More sharing options...
Simon Posted March 26, 2014 Report Share Posted March 26, 2014 We will need to confirm the sub-board fitted. Are you able to post a pic here of the ECU with the lid off, or email [email protected] Quote Link to comment Share on other sites More sharing options...
jason buchan Posted March 27, 2014 Author Report Share Posted March 27, 2014 Gidday here is photo of inside cheers Quote Link to comment Share on other sites More sharing options...
Simon Posted March 27, 2014 Report Share Posted March 27, 2014 Currently that unit is geared for a Nissan so would need a sub-board change to allow the use on the Cordia. We would need to see the unit back to change this over and give a full bench test. Quote Link to comment Share on other sites More sharing options...
jason buchan Posted March 27, 2014 Author Report Share Posted March 27, 2014 Ok cool wat sought of cost is involved in this? Quote Link to comment Share on other sites More sharing options...
Simon Posted March 28, 2014 Report Share Posted March 28, 2014 You would be looking at $150 + gst and freight. Quote Link to comment Share on other sites More sharing options...
jason buchan Posted March 29, 2014 Author Report Share Posted March 29, 2014 Cool wat address we send it to? Quote Link to comment Share on other sites More sharing options...
Simon Posted March 31, 2014 Report Share Posted March 31, 2014 Send to Electronz 22 Mowbray St Waltham Christcurch Be sure to include full contact details and note that you wish to have the sub-board changed to reluctor type. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.