Jump to content

G4 Knock block set up


Dynotech NZ

Recommended Posts

Hi guys I have just installed and tuned my JDM Evo 8MR with G4 plugin ecu (Evo 9 3plug). Tuned with G4 knock block kit with head phones, car is running det free I would now like to install my G4 knock block for knock monitoring, i need to know the following please. Can i tap into the factory knock sensor? So i can leave the Bosch sensor that came with the kit free to tune other cars If so do i use the factory knock sensor wire going to the ecu (this isnt used with the G4 plugin ecu) it is Pin 91 What do I do for Knock sensor ground wire? Do I just use the Sensor ground plug/wire on the ecu this is Pin 34 Thanks Phil

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...