impellerhead Posted May 9, 2011 Report Share Posted May 9, 2011 It seems as it's only possible to send data via the can bus on the G4? Should it be like this? In the vipec software you can both send and retrieve data. Am I missing something? Quote Link to comment Share on other sites More sharing options...
cameronhall Posted May 12, 2011 Report Share Posted May 12, 2011 Also, with the version 4.8 firmware. There is a new CAN runtime value with vairous digital and analog inputs. Any idea when the information will become available on programming these via the CAN Bus? Thanks Cameron Quote Link to comment Share on other sites More sharing options...
ashesman Posted May 13, 2011 Report Share Posted May 13, 2011 In both Link and ViPEC products, the CAN receive channels are not configurable. Only the MoTeC E888 is supported for CAN receive at the moment. More devices will be added in the future. It is unlikely that custom receive channels will be added in the near future. Do you have a particular device that you wish to receive data from? In 4.8 onwards, the CAN runtime values refer to the received channels. Currently only an E888 can be used to provide input for these runtime values. Quote Link to comment Share on other sites More sharing options...
cameronhall Posted May 16, 2011 Report Share Posted May 16, 2011 I'm looking at building a new digital dash with CAN. My plan was to use the virtual CAN inputs for switching boosts maps,logging on/off etc so I can free up the I/O on the ECU. I won't be starting the build for at least 6 months due to other projects, so maybe the custom receive channels will be closer to been supported then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.