Peter Rundström Posted March 7, 2013 Report Share Posted March 7, 2013 Hallo! I wonder how many mAmp the 5 Voltige support can handle in a Link Storm? Thanks. // Peter Quote Link to comment Share on other sites More sharing options...
Scott Posted March 7, 2013 Report Share Posted March 7, 2013 Hi Peter, The 5 Volt supply is rated at 400 milliamps. That will run a huge amount of sensors. It is not designed to be a supply voltage for running loads. Cheers, Scott Quote Link to comment Share on other sites More sharing options...
Peter Rundström Posted March 8, 2013 Author Report Share Posted March 8, 2013 Thank you for your answer! I want to use it as a referense for a sensor becuse it's a stabil signal. Is it the same with the 8 volt supply?  Regards Peter Quote Link to comment Share on other sites More sharing options...
Scott Posted March 10, 2013 Report Share Posted March 10, 2013 Hi Peter, After consulting with the engineering team, the answer is yes, the 5 volt and 8 volt are both capable of 400 milliamps. Cheers, Scott Quote Link to comment Share on other sites More sharing options...
Peter Rundström Posted March 11, 2013 Author Report Share Posted March 11, 2013 Hallo! Thank you for your help. I think it's not going to be a problem becuse my sensor is only going to use about 0,04 amp Regards Peter Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.