supra Posted January 13, 2015 Report Share Posted January 13, 2015 Hi , using a 4 teeth trigger wheel without a cam sensor is their a spesial posision for the crunk sensor to sychronise?? Quote Link to comment Share on other sites More sharing options...
Simon Posted January 14, 2015 Report Share Posted January 14, 2015 Hi What engine is this trigger on. Are the 4 teeth even spacing on the crank? If its on a 6cylinder and its 3 even spaced teeth 120 apart with an extra tooth between two teeth then this is not a valid trigger for our ECU and must be changed. Quote Link to comment Share on other sites More sharing options...
supra Posted January 14, 2015 Author Report Share Posted January 14, 2015 4cylnder enjine . the trigger is from ford rs500 bad the sensor position is castom  Quote Link to comment Share on other sites More sharing options...
Simon Posted January 15, 2015 Report Share Posted January 15, 2015 You will need the matching CAM trigger then you can use the RS500 trigger mode. Quote Link to comment Share on other sites More sharing options...
supra Posted January 15, 2015 Author Report Share Posted January 15, 2015 ok Simon thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.