Mark Ireland Posted August 27, 2014 Report Share Posted August 27, 2014 Hi,  I have a G4+ Storm and have wired in an Innovate LC-2 wideband as per their directions.  In pclink I can only get it to display Average AFR and not the actual AFR (values obviously differ to the gauge with the wideband).  Thoughts on what I should be looking at changing in the settings?  Thanks, Mark Quote Link to comment Share on other sites More sharing options...
Simon Posted August 28, 2014 Report Share Posted August 28, 2014 Assuming you only have the one wideband input the average should match. Are you seeing values that are well out? You can check the actual through the runtimes menu (F12) under the Analog tab. Quote Link to comment Share on other sites More sharing options...
Daniel Bailey Posted August 28, 2014 Report Share Posted August 28, 2014 Had a look at the PCL you sent me Mark, it has been set up in the Link as a narrow band sensor (assuming it's on AN Volt 1).... Â that's not likely to be too helpful Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.