Jo LeForce Posted July 24, 2014 Report Share Posted July 24, 2014 Got a 2JZ GTE VVTi with G4+ Storm, I just flashed it with a base file. I can't seem to get an output RPM signal out of the ECU needed for the RPM gauge. Also, I'm not getting any VVT output, although VVT is enabled in file at 1500rpm. I'm not sure what's wrong, am I suppose to assign those parameters to certain outputs/pins? Quote Link to comment Share on other sites More sharing options...
Simon Posted July 24, 2014 Report Share Posted July 24, 2014 You will need to assign a Aux output to a Tacho Function and the VVT will also need an Aux out assigned. Quote Link to comment Share on other sites More sharing options...
Jo LeForce Posted July 25, 2014 Author Report Share Posted July 25, 2014 In the base map, VVT is already assigned to Aux 2, but still I'm not getting an output signal! Which pin is Aux2? Should I try & assign it to a different Aux? I've got Aux 5-8 all off, so, I'll assign Aux 5 to Tacho. Quote Link to comment Share on other sites More sharing options...
Simon Posted July 28, 2014 Report Share Posted July 28, 2014 You will of course need to confirm that the configuration matches how the unit has been wired. Pinout info can be found in the wiring section of the help file in PC link. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.