BMW2002 Posted July 1, 2013 Report Share Posted July 1, 2013 What happen if you overboost the internal 2,5 bar map sensor in the storm? Quote Link to comment Share on other sites More sharing options...
Simon Posted July 2, 2013 Report Share Posted July 2, 2013 Will depend on by how much. Sensor wise the burst pressure is much higher than 2.5bar. The main issue is you fuelling will be stuck at the 2.5bar level and you will get no fuel with the increased boost. Quote Link to comment Share on other sites More sharing options...
Simon Posted July 2, 2013 Report Share Posted July 2, 2013 Sensor wise it shouldn't be an issue. In theory the sensor is never going to be reading 270 so should never hit the limit. Check the fault settings on the voltage input it could be reaching a fault voltage and operating off the error value. Quote Link to comment Share on other sites More sharing options...
Simon Posted July 11, 2013 Report Share Posted July 11, 2013 From that, I'm thinking along similar lines, in it being something that is breaking down with a bit of heat. Coils and leads will be a likely starting point. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.