Jason Conklin Posted February 25, 2007 Report Share Posted February 25, 2007 Hello, is it possiable to make an adapter link for the honda obd0 models? or else can link supply only the board with honda obd0 plugs and i will the rest my self? thanks jason Quote Link to comment Share on other sites More sharing options...
ashesman Posted February 25, 2007 Report Share Posted February 25, 2007 We are currently offering an AdaptaLink for the 92-96 three plug 2 row Civic/Integra ECU's. We can still supply old style plug in ECU's for some 96-2000 adn 2000-2002 models. I am a little uncertain of the exact models of Honda that you are calling OBD0. Chances are that we can supply a bare header, but it is unlikely that we will make an AdaptaLink (unless we get significant demand). Quote Link to comment Share on other sites More sharing options...
Jason Conklin Posted February 26, 2007 Author Report Share Posted February 26, 2007 ashley, the adapter link that is available is the obd 1. the obd 0 are the models from 88-91,these are the ecu`s that have an led in the middle of the board that flashes when you get a fault. if link can supply a bare connector is great and then i can build the adapter myself. the adapter link that link offer is great in fact im going to order some of those. thanks jason Quote Link to comment Share on other sites More sharing options...
ashesman Posted February 26, 2007 Report Share Posted February 26, 2007 If you send me a picture of the header, I will have a look and see if we stock it. Unfortuneately I have no information on those older models... I know the LED you mean, but havn't seen one of those for years now! Quote Link to comment Share on other sites More sharing options...
Jason Conklin Posted February 27, 2007 Author Report Share Posted February 27, 2007 have you got an e mail where can i send the photos to please? thanks jason Quote Link to comment Share on other sites More sharing options...
ashesman Posted February 27, 2007 Report Share Posted February 27, 2007 Either post the picture on the forums or email it to [email protected] Quote Link to comment Share on other sites More sharing options...
Stevieturbo Posted January 10, 2011 Report Share Posted January 10, 2011 bump for any information to help run a G3 on a old Honda OBD0. Even if it means using an OBD0 to OBD1 conversion cable. Although I dont see why that would be needed. Does anyone have pinouts for the Honda ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.