John Smith Posted June 16, 2013 Report Share Posted June 16, 2013 Howdy, I have an R34GTT plug and play G4. I have just done an inlet and throttlebody conversion to fit an RB26 6x throttlebody setup. I have pulled across the RB26 ACV as well but I can't seem to find a way to enable to the idle ignition control selection under ECU Settings (as available on the RB26 base map) on my R34GTT map. I'm assuming that there is a setting somewhere that will enable it, but i can't find it for the life of me. When I search under parameters it does show the field but it's greyed out. At the moment it's idling at almost 1800 rpm and i need to lower it down. Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted June 17, 2013 Report Share Posted June 17, 2013 You will need to get the idle a bit lower before the ignition trim will be effective. Check you have current firmware in the ECU and have not used up all available tables. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.