Shaun Harris Posted September 19, 2014 Report Share Posted September 19, 2014 Just about to get my project going. I have got a 1250cc Suzuki Bandit motorbike engine in a jet boat, it is coil over plug and quad throttle body fuel injection. going to use an atom to run it. my question is. will the factory vacuum ports on the motor work on the Link Map sensor or am I better to just tune via Tps. the factory vacuum is basically 4 tubs running off each throttle body into 1 main port. will this be a stable vacuum for a map sensor? any thoughts.  Quote Link to comment Share on other sites More sharing options...
Simon Posted September 22, 2014 Report Share Posted September 22, 2014 Hi Shaun It will be as good a MAP signal as you could hope to get, however this is still likely to be a very average signal for tuning off. I suspect you will need to use TPS as the main tuning input. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.