motionper Posted April 14, 2014 Report Share Posted April 14, 2014 i understand the firing order to be 315-405 but no matter what i do the front cylinder is 45 degrees off-I am calling the rear cylinder #1 and have ignition one to that coil-i have tried reversing the triggers and the same result-i can time cylinder one no problem any ideas??? i have tried #1 at 0 and # 2 at 405-315-675 all to no avail Quote Link to comment Share on other sites More sharing options...
motionper Posted April 14, 2014 Author Report Share Posted April 14, 2014 also what cam sync set up should i use???? maybe this is the problem Quote Link to comment Share on other sites More sharing options...
Simon Posted April 14, 2014 Report Share Posted April 14, 2014 Hi Bob #1 should be 0 and #2 at the number of degrees later that the second cylinder fires. Looking at the figures you have this will be 90 Â Sync mode will depend on what you have on the cam shaft. If its a single tooth that is a short pulse then it will need to be set as Cam x1 Quote Link to comment Share on other sites More sharing options...
motionper Posted April 16, 2014 Author Report Share Posted April 16, 2014 if anyone installs this unit on a v twin odd fire the correct setting for odd fire is 0 and 405 with single crank sensor and a cam sensor-hope it saves someone some time Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.