Robert Wolf Posted October 29, 2013 Report Share Posted October 29, 2013 Hello, i have a Problem with my R33 GT-R The engine didn´t start yet, because the injector didn´t work. They have 12V I drive yesterday normally with the car and today he didn´t start Maybe the resistors are damged ? I connect my Laptop to the Link and see that there are faults in the system. - AN V3 at GND - AN V4 at GND and the hardware block 2 error´s (what does that mean ?)  could someone help me please thx Robert  Quote Link to comment Share on other sites More sharing options...
Simon Posted November 4, 2013 Report Share Posted November 4, 2013 The AN volt errors are likely to be from a sensor having been unplugged at some point. AN volt 3 is the TPS signal. The Hardware block error is more of a concern. You can try cycling the power to the ECU to see if this clears. If not it is likely we will have to get the unit back for inspection / repair. Quote Link to comment Share on other sites More sharing options...
Robert Wolf Posted November 23, 2013 Author Report Share Posted November 23, 2013 Â i send the ecu to my mapper (MGT Racing) but the error still there :-/ (New Firmware etc.) They say, that the hardware is damaged What is the price for the repair and must i send it to New Zealand ? Â thanks for answere Quote Link to comment Share on other sites More sharing options...
Simon Posted November 28, 2013 Report Share Posted November 28, 2013 Price will be unknown until we can see the board. It will need to come back to NZ for repair. Generally the freight will be the biggest cost. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 22, 2014 Report Share Posted April 22, 2014 Hi Robert if you could fill in this form https://docs.google.com/spreadsheet/viewform?usp=drive_web&formkey=dHQ3YVVvYkdaWUVqTmgwSXQyMjE2YlE6MQ#gid=0 Quote Link to comment Share on other sites More sharing options...
Robert Wolf Posted April 23, 2014 Author Report Share Posted April 23, 2014 Hi Simon, what should i have to do next ? Quote Link to comment Share on other sites More sharing options...
Simon Posted April 23, 2014 Report Share Posted April 23, 2014 Once filled in you are welcome to send the unit in by you preferred postal service. I would suggest a tracked service. Quote Link to comment Share on other sites More sharing options...
Robert Wolf Posted June 3, 2014 Author Report Share Posted June 3, 2014 Hello Simon, i have send the unit yesterday to NZ. It arrives 6-7 days. Â Quote Link to comment Share on other sites More sharing options...
Simon Posted June 3, 2014 Report Share Posted June 3, 2014 Sweet will keep an eye out for it. Quote Link to comment Share on other sites More sharing options...
Robert Wolf Posted June 18, 2014 Author Report Share Posted June 18, 2014 When can i get informations about it ? Quote Link to comment Share on other sites More sharing options...
Simon Posted June 18, 2014 Report Share Posted June 18, 2014 Hi Robert I believe the servicing team have contacted you via email regarding this unit. It is all ready to return. Quote Link to comment Share on other sites More sharing options...
Robert Wolf Posted June 25, 2014 Author Report Share Posted June 25, 2014 Hey Simon, thanks for your help I got my link g4 today back, but the USB cable isn´t in here :-/ Could you look after it ?  Quote Link to comment Share on other sites More sharing options...
Simon Posted June 26, 2014 Report Share Posted June 26, 2014 Woops we now have a very apologetic service person its as good as in the post. Quote Link to comment Share on other sites More sharing options...
Robert Wolf Posted June 26, 2014 Author Report Share Posted June 26, 2014 ok good, thanks a lot Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.