Andrew Smith Posted July 9, 2007 Report Share Posted July 9, 2007 Hi guys, About to install the G3 with adaptor to my V3 STI. Just wanted to know the colour codes for the signal and ground wires on the AFM connector which i need to use to wire in the Air temp sensor? Also have to mount the sensor to the intercooler piping. Can someone tell me what size drill and tap i should use? Im not very good with taps so i dont wanna stuff the piping up. Thanks. Quote Link to comment Share on other sites More sharing options...
Top Tune NZ Posted July 9, 2007 Report Share Posted July 9, 2007 depends on which air temp sensor you have but the 3/8 npt air temp sensor requires a 13.5 mm drill hole and a 3/8 npt tap the wiring colour codes are in my experiance not always the same so have a look on page 10 of the user manual you will see that there is a diagram there to help you out cheers ross Quote Link to comment Share on other sites More sharing options...
Andrew Smith Posted July 9, 2007 Author Report Share Posted July 9, 2007 Thanks Ross...i have the bosch sensor...the thread size is 17mm Quote Link to comment Share on other sites More sharing options...
Andrew Smith Posted July 12, 2007 Author Report Share Posted July 12, 2007 nah its cool...i figured it out...thanks anyway bro Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.