motionper Posted September 20, 2014 Report Share Posted September 20, 2014 i am using di1 with my clutch switch as a launch control i feed twelve volts thru the switch when the clutch is in i want to groynd a relay off of di1 with the same  but it won't activate unless i leave di1 off if i put it di1 on it doesn't work ---help Quote Link to comment Share on other sites More sharing options...
motionper Posted September 21, 2014 Author Report Share Posted September 21, 2014 it appears di1 will only activate one function such as launch control and timing retard on the two step which i am using both, i don't see another option on digitial inputs other than di1 Quote Link to comment Share on other sites More sharing options...
Simon Posted September 22, 2014 Report Share Posted September 22, 2014 So you want a AUX to switch based on Di1? If so just configure your aux out to a GP out put and condition 1 set to Di1 Quote Link to comment Share on other sites More sharing options...
motionper Posted September 22, 2014 Author Report Share Posted September 22, 2014 i did this and di1 won't operate more than one aux circuit at  at a time Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted September 22, 2014 Report Share Posted September 22, 2014 Hi Bob, Do you have a spare DI you can setup, use a dual pole relay and set the second output from the relay to another DI to achieve what you want. Sorry for the lame work around, I am very busy and just thought I would suggest this as a temporary setup until myself or Simon have time to make a pcl configuration up and test it for you. Is this setup separate to your earlier IC SPRAYER question. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Simon Posted September 23, 2014 Report Share Posted September 23, 2014 The Di should be able to control 5 aux outs all of the one input. Can you send the MAP? or post it here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.