Matmor Posted October 23, 2006 Report Share Posted October 23, 2006 Hi. When trying to set up the TPS using the tuning module I cannot set the low and high value to 10/100. It can only be set to 9/100 och 11/101. Is there a way to get around this? And also, is there a way to set the TPS in PCLink? If so how? Quote Link to comment Share on other sites More sharing options...
ashesman Posted October 23, 2006 Report Share Posted October 23, 2006 If you have a PC tuneable PossumLink ECU then under the Options menu in PCLink you can select TPS Setup and follow the instructions. The reason you cannot get a TPS value of 10 may be to do with the TPS sensor itself. Firstly test the TPS signal line with a multi meter. Open the throttle very slowly and check that the voltage steadily increases from about 0.5-1V up to about 4.5-5V (the actual values are not critical as long as it smoothly increases). Adjust the TPS position very slightly so that closed throttle is in a different position. Do another TPS setup and see how you get on. Having a TPS value of 9 or 11 instead of 10 is not a problem anyways... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.