Bannon Keft Posted August 2, 2012 Report Share Posted August 2, 2012 Hi, Does the AFR Target  table have any effect on the main fuel table if the setting Fuel->Fuel Setup->Fuel Main->Open Loop AFR Table = OFF? Does the Closed Loop Lambda setting reference the AFR Target table? I am trying to trouble shoot a hesitation at about 3000rpm Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted August 2, 2012 Report Share Posted August 2, 2012 If open loop AFR is off then the AFR table is only used as a reference / target for closed loop lambda control. Quote Link to comment Share on other sites More sharing options...
Bannon Keft Posted August 3, 2012 Author Report Share Posted August 3, 2012 Thanks for the reply Simon And Closed Loop Lambda is only active when all the lock out conditions are met? Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted August 6, 2012 Report Share Posted August 6, 2012 Correct and assuming the function is turned on. Quote Link to comment Share on other sites More sharing options...
Bannon Keft Posted August 10, 2012 Author Report Share Posted August 10, 2012 Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.