Dynotech NZ Posted May 19, 2011 Report Posted May 19, 2011 Hi team Just updated firmware from 4.8.0 to 4.8.1 (Evo 9 plugin G4) Went through settings to double check everything and boost target table is now missing! (I have attached screen shot below) Keep up the good work, Thanks Phil Quote
Dynotech NZ Posted May 19, 2011 Author Report Posted May 19, 2011 And here is screen shot with firmware 4.8.0 Thanks Phil Quote
ashesman Posted May 20, 2011 Report Posted May 20, 2011 Yup, we fixed that problem yesterday. Will do another PCLink release very soon. Sorry about that. The table is still there but it is at the bottom of the ECU settings list labelled T4 or something like that. Also, the numbers will read half what they should. Quote
Dynotech NZ Posted May 20, 2011 Author Report Posted May 20, 2011 Thanks Ashley Yeah i noticed that table, it is labelled as table 8 and all values were half my target as you say Keep up the good work!! Phil Quote
Bevan Marshall Posted May 24, 2011 Report Posted May 24, 2011 Instead of starting a new thread, it seems as if the display changes itself whenever it wants too aswell, for example on the 'tuning' tab i have the regular displays, ECT,, TP, IAT, RPM etc, and i add things like AFR, and change the gauges to what i like, but then the enxt time i open pclink, or its even happened during tuning, some of them stop working all together, and have to add them again, or disappear with something else in their place. Any ideas? Quote
Bevan Marshall Posted May 24, 2011 Report Posted May 24, 2011 Oh shit.. i think i just figured it out.. my apologies Link Ignore me Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.