Jump to content

Toyota Starlet Glanza


Recommended Posts

Hello , I have a Toyota Starlet Glanza (4EFTE engine) and i just finished installing a link G4 Storm ECU. Moreover i replaced the stock distributor ignition with Wasted spark ignition taken from a Toyota corolla AE111 (4EFE engine) and also installed the OEM toyota corolla crankshaft trigger wheel along with the magnetic sensor. I managed to set up the coils and igniter correctly but i am having trouble configuring the trigger wheel in trigger menu of pclink. The only info i have on the crankshaft wheel is that the sensor is magnetic and has 2 cables on it and that the trigger wheel has 32 teeth and ONE bigger tooth (there is NO gap). Also when the bigger tooth is facing the sensor the first cylinder piston is at the top end. Could someone please help me with the above settings so that i can finally start the engine ? attached is a foto of the trigger wheel thanks !

post-3455-143621562152_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...