Austin Gray Posted August 16, 2013 Report Share Posted August 16, 2013 Hey, I have a g3 in a single turbo 2jz gte 240sx. Is there a base map out there to get it started and running? Quote Link to comment Share on other sites More sharing options...
Simon Posted August 16, 2013 Report Share Posted August 16, 2013 Once you have configured the basics such as triggers, TPS ignition mode, the base numbers with maybe an adjustment to the master fuel should get that running. Quote Link to comment Share on other sites More sharing options...
Austin Gray Posted August 16, 2013 Author Report Share Posted August 16, 2013 Sounds good. It's a JDM with 550CC injectors, will I have to keep the resistor pack or can I eliminate it? Quote Link to comment Share on other sites More sharing options...
Simon Posted August 19, 2013 Report Share Posted August 19, 2013 Depends on the injectors if they are low impedance around 3ohms then you will need to retain the resistor (ballast) pack. If however the 550 measure in at around 12 ohms then it needs to be removed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.