Matt Woodford Posted June 2, 2015 Report Share Posted June 2, 2015 I have been running my car for about a year now problem free but yesterday when I tried to start the car it wouldn't fire up without throttle input and would stall if I didn't maintain some throttle input. With ignition on the engine warning light flashes 5 times then pauses and repeats. Question is what does this error code mean? Any help is greatly appreciated. Cheers Matt Quote Link to comment Share on other sites More sharing options...
Simon Posted June 5, 2015 Report Share Posted June 5, 2015 HI Matt Think you have this sorted now? And you had a AN volt 3 error which was the MAP sensor? Quote Link to comment Share on other sites More sharing options...
Matt Woodford Posted June 5, 2015 Author Report Share Posted June 5, 2015 Hi yes all sorted thank you, although a new problem has arisen. With ecu plugged into laptop did a firmware update, when ecu went to reboot it lost power and has now reset to firmware version 0 software version 0. Also ecu status keeps flicking between online, searching and offline? Any advise as how to stop this? then I can return to factory settings. cheers Quote Link to comment Share on other sites More sharing options...
Simon Posted June 7, 2015 Report Share Posted June 7, 2015 Hi Matt If you have a dash connected make sure it is unplugged before doing the firmware update. Also set PC link to be manual connection only. Then run the update again. Quote Link to comment Share on other sites More sharing options...
Matt Woodford Posted June 8, 2015 Author Report Share Posted June 8, 2015 Hi  turned out the ecu was getting power from alternate source. Strange but either way problem solved.  cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.