rb25 neo plug in

[adam hrachowina]

Hi,

Ive been searching the menu in the RB25 neo ecu for the correct cam control ,the only one listed is the VQ35,

is this also correct for the neo engine ?

 

Thanks

Adam

[Jurgen Biggelaar]

Hi Adam.

No.  This NEO RB engine is purely an on/off solenoid, so it would be hooked up to an AUX with the function 'GP Output' (General Purpose Output).  There you can set your switching conditions and for best results I think turn it on at around about 2000RPM, and off at about 5500RPM - 6000RPM.  It does not require anything special as it is not variable cam control.

Jurgen

[adam hrachowina]

Cheers Jurgen.