subaru555asturias Posted August 11, 2015 Report Share Posted August 11, 2015 I run v7 v9 pnp subaru ecu uptated to the last firmware and i dont see how manage the als using the egt as limit.... only see the ect.Help? Quote Link to comment Share on other sites More sharing options...
Simon Posted August 11, 2015 Report Share Posted August 11, 2015 Its going to depend a lot on how you have the anti lag configured. But you should be able to set up a virtual AUX to be a condition for the LAG to be active and have it based of EGT Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 12, 2015 Report Share Posted August 12, 2015 Hi,Simon is correct as always,I am how ever in a position to allow some time to work this out for you if you wish.I don't have to do 200 000 emails and other assorted duties as does Simon daily.So if you wish to send me your pcl file to [email protected] I will setup what you are requesting in the software and run it on my simulator for you.RegardsDave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.