subaru555asturias Posted August 12, 2015 Report Share Posted August 12, 2015 (edited) Hi.I get one cheap sensor EGT Thermocouple Type:K Type (ungrounded) from ebay and cannot do it work in my ecu in An Temp 3 mode.Maybe with a cal table? What values I need? Edited August 12, 2015 by subaru555asturias Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 12, 2015 Report Share Posted August 12, 2015 Hi,what EGT amplifier do you have with your sensor.RegardsDave. Quote Link to comment Share on other sites More sharing options...
Simon Posted August 13, 2015 Report Share Posted August 13, 2015 As Dave mentioned with a K type thermo couple you need an amplifier to bring the signal up to a 0-5V signal that can be put into a free AN volt channel. Quote Link to comment Share on other sites More sharing options...
subaru555asturias Posted August 13, 2015 Author Report Share Posted August 13, 2015 No amplifier.... where I can buy one? Thanks. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 13, 2015 Report Share Posted August 13, 2015 Hi ,there are many brands available.However you are best buying a new kit that comes with another thermocouple that is calibrated to work with the amplifier.If you just want a cheap generalised unit with fairly good data output for the ECU , I used PLX Devices on some jobs.If you wish for a more accurate unit please contact me via PM.RegardsDave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.