Llewellyn Posted October 9, 2015 Report Share Posted October 9, 2015 Hi Guys,I know this has already been raised with you before but I thought after three firmware updates it would be fixed. Just updated to 5.4.5 today and still the same issue.AUX 10 when set as CE Light stopped functioning properly at version 5.2.2 and now stays on while driving all the time. Turning the output off turns the light off, turning it back to CE Light keeps it off until you restart the car. ECU is a Red Extreme G4+.Would be great to have a CE Light again (I've had this issue for a rather long time)Cheers,Llewellyn Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted October 9, 2015 Report Share Posted October 9, 2015 Hi Llewellyn,have you also set up the CHECK ENGINE LIGHT configuration under the shift light tab.RegardsDave. Quote Link to comment Share on other sites More sharing options...
Llewellyn Posted October 24, 2015 Author Report Share Posted October 24, 2015 Hi Dave,Thanks but already done this. Engine running - On with Fault Codes, Key on with no Faults - OffSimon is aware of this - Just low priority I guess Cheers,Llewellyn Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.