r32skizzzaaa Posted November 19, 2015 Report Share Posted November 19, 2015 does anyone have a rb25det neo cas pinout? cant find a reliable answer on internet, and coil pinout cheers! Quote Link to comment Share on other sites More sharing options...
Simon Posted November 19, 2015 Report Share Posted November 19, 2015 Hi there is some variation in the CAS sensor.The late R34 sensors are a mirror image of the attached image.I don't have a pinout for the coils. Quote Link to comment Share on other sites More sharing options...
r32skizzzaaa Posted November 20, 2015 Author Report Share Posted November 20, 2015 awesome that made my life a lot easier thanks a million! my one is the plastic cas so im guessing its the later one so from left to right will be ground power trig one trig two? Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted November 20, 2015 Report Share Posted November 20, 2015 Hi,what coils are you using.Normally they are all marked with + - and I+ = Ignition power- = Grounded to cylinder headI = Ignition trigger.Normally the trigger wire is the centre wire.So just check for 12 volts with ignition on at one end with multi meter and check ohms to cylinder head at the other end, should be very close to 0 OHMS and if you do a voltage check , ignition OFF should read less than one volt.RegardsDave. Quote Link to comment Share on other sites More sharing options...
Simon Posted November 23, 2015 Report Share Posted November 23, 2015 awesome that made my life a lot easier thanks a million! my one is the plastic cas so im guessing its the later one so from left to right will be ground power trig one trig two?Yep spot on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.