Guest |374| Posted June 15, 2009 Report Share Posted June 15, 2009 Hey all just need some help with running a msd 6a with the new vl boards .I have wired it to the ign 1 and the rest as per normal.Just not 100% on the software settings , so far i have set the dwell edge to rising and scaled the dwell table all at 2 as someone suggested this.The problem im having is when timing is locked and engine is reved it advances with engine rpm , will not hold timing.It all runs fine when the standed ignitor is used.Any help or ideas would be great cheers Justin. Quote Link to comment Share on other sites More sharing options...
bsh Posted June 15, 2009 Report Share Posted June 15, 2009 I believe that your MSD require dwell edge "falling". Quote Link to comment Share on other sites More sharing options...
rayhall Posted June 15, 2009 Report Share Posted June 15, 2009 Yes dwell edge falling is correct. Also set the dwell table to 2.5 msec everywhere. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |374| Posted June 16, 2009 Report Share Posted June 16, 2009 Thanks Ray worked 100% , i did read falling edge for msd in the manaul but wasnt quite sure about dwell map no's anyway working great. Cheers Justin. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.