Matt Alexander Posted March 22, 2016 Report Share Posted March 22, 2016 I have an old LEM v4 with unknown history, so we're seeing if we can at least power it up and check for connectivity before we try to put it in a car.I have a USBLink, with the appropriate ribbon cable to the ECU. Applying power and ground to the ECU from a spare, fully-charged car battery.When we plugged in the USB, the computer recognized it, and installed a driver successfully....but I'm unsure if it's correct. I found one post here talking about the driver file, but the link is dead (it's from 2006....). This should, work, shouldn't it? I'm assuming at this point it's a driver issue, anyone have the correct one? Quote Link to comment Share on other sites More sharing options...
Simon Posted March 23, 2016 Report Share Posted March 23, 2016 As long as the USB is assigned as a virtual com port and gets a com number lower than 10 you should be ok. Have had a search of our server and can't find any USBLink drivers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.