Skylinekrille Posted April 17, 2016 Report Share Posted April 17, 2016 Quick questionCan the Link G4 system make it possible to use the LS Black crank trigger sensor along with the 60-2 trigger wheel? Or do i need to get the LS grey trigger sensor Quote Link to comment Share on other sites More sharing options...
Scott Posted April 18, 2016 Report Share Posted April 18, 2016 (edited) I don't have experience in using these sensors. I've done some reading (http://www.lsenginediy.com/crankshaft-camshaft-signals-guide/) and from this I would say no. There are three possible setups that I think will work with our ECU:A) Black sensor, 24 tooth (double layer) wheel, with cam level type sync signalor B ) Grey sensor, 60-2 tooth wheel, with cam level type signal.orC) ?? Sensor (LS2 or LS 7), 60-2 tooth wheel, with 4 tooth cam wheel. Edited April 18, 2016 by Scott Added third option Quote Link to comment Share on other sites More sharing options...
Skylinekrille Posted April 19, 2016 Author Report Share Posted April 19, 2016 Confirmed now using trigger scope, The crank pulse when using LS Black trigger sensor with the 60-2 trigger wheel is weird, Managed to get a Grey sensor and got a proper trigger signal and its working fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.